Sacramento: (916) 641-0144         Elk Grove: (916) 685-5856

One of the most vital ways to keeping your home clean and healtvacuum carpetshy is weekly vacuuming. You can keep your carpets soft and unmatted by vacuuming frequently. You’ll prevent dirt from getting stuck deep in your carpets and also improve the air quality in your home.

So what are the best ways to vacuum? What nozzles do you use and in which situations? Here are our  tips and techniques for the most effective way to vacuum and while using the different attachments and settings. Unleash the full power of your vacuum!

Secrets of the Vacuum Attachments

Lets figure out which attachments your vacuum has and what they should be used for. Here are the most common tools:

  1. Crevice Tool – This is the thin, long attachment. Perfect for narrow areas and tough-to-reach corners.
  2. Dusting Brush – This attachment is ideal for surfaces that need a softer touch.
  3. Upholstery Nozzle: Perfect for vacuuming drapes, mattresses, and a variety of upholstered furniture.
  4. Radiator Brush – Great for vacuuming radiators and vents.
  5. All-Purpose Brush – Effective for vacuuming shelves and other flat surfaces.

Appropriate Settings for Different Surfaces

Most vacuums will have the option to adjust pile height. Pile height refers to the measurement of the carpet or rug in question from its surface to its backing. The adjustment knob is usually located near the front of the base of your vacuum. The knob moves the underneath powered brush up and down. Make sure to adjust this setting for different surfaces. The vacuum needs to makes contact with the carpet while leaving enough space for some airflow.

A vacuum’s high pile height setting is best for wool or wool blend, high pile, or soft carpeting. This setting will skim the top of the carpet, allowing enough airflow for effective suction.

For a more flat, commercial-type carpet, use a lower pile setting. If the setting is too high, the vacuum won’t be able to make a good suction and will be much less effective.

If you’re vacuuming hardwood or other uncarpeted floors, put your vacuum on the bare floors setting. This setting uses suction only so your floors don’t get scratched by the powered brush. If your vacuum doesn’t have a bare floors setting, then don’t use it on hardwood!

Most Effective Way to Vacuum

As you might have guessed, it’s best not to just do a once-over on your carpets. Try to use slow, back and forth motions in an overlapping pattern. Remember that there really is no need to  press down while vacuuming as the suction will do the work for you. Don’t worry about going over the same area 7 or 8 times, just make sure to move slightly to the left of right about every three strokes.

Avoid resoiling your carpets by remembering to dust blinds, furniture, and other surfaces before vacuuming.

How Often Should I Vacuum?

  • You should vacuum at least once a week with a CRI Seal of Approval/Green Label vacuum cleaner.
  • Vacuum once a day in high traffic areas where you spend most of your time.
  • Vacuum twice a week in medium traffic areas.
  • Vacuum weekly in light traffic areas, using attachments to vacuum corners and edges.

Keep Your Vacuum Running Longer

In order to get the best cleaning results day-in and day-out,, keep your vacuum well maintained. Here are a few tips:

Keep the instructions for your specific vacuum and refer to them when needed.

Make sure the vacuum hose and adjustments aren’t clogged.

Avoid damaging your vacuuming by gripping the handle, not the hose, when cleaning.

Clean hair, dust, and other particles from your vacuum brushes before they become a problem. Replace brushes when they become worn.

Check your vacuum bag and empty or replace it when it’s about half to two-thirds full.

Inspect your vacuum for bent metal or rough edges that can snag your carpet.

Remember that Acme Chem-Dry is your trusted partner for maintaining a clean and healthy home! Learn more about our cleaning services and how we can help eliminate allergens and bacteria from your carpet and upholstery!